MIL-PRF-29250 Loading Jack System, Iso ContainerThis specification covers the International Organization of Standardization \(ISO\) container loading jack system \(ILJS\) which is used to provide level loading and unloading on aircraft. The ILJS also is used to provide on and off loading of 102-inch \(2 591 millimetre \(mm\)\) wide flatbed trailers and all 25K-loaders, and mobility and maneuverability for freight containers having ISO corner fittings \(hereinafter referred to as ISO containers\).

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13

MIL-PRF-29250C

(Application for copies should be addressed to the American National Standards Institute, Inc.,

11 West 42nd Street, New York, NY 10036.)

AMERICAN WELDING SOCIETY, INC. (AWS)

AWS D1.1

Structural Welding Code-Steel.

(Application for copies should be addressed to the American Welding Society, 550 N.W. LeJeune

Road, Miami, FL 33126.)

INTERNATIONAL ORGANIZATION OF STANDARDIZATION (ISO)

ISO 1161

Series 1 Freight Containers-Corner Fittings.

(Application for copies should be addressed to the American National Standards Institute, Inc.,

11 West 42nd Street, New York, NY 10036.)

SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)

SAE J534

Lubrication Fittings, Standard.

SAE J753

Maintenance Interval Chart, Recommended Practice.

(Application for copies should be addressed to the Society of Automotive Engineers, Inc.,

400 Commonwealth Drive, Warrendale, PA 15096.)

STEEL STRUCTURES PAINTING COUNCIL (SPCC)

SSPC-SP19

Surface Preparation Specification No.10, Near White

Blast Cleaning.

(Application for copies should be addressed to the Steel Structures Painting Council,

40 24th Street, 6th Floor, Pittsburgh, PA 15222-4643.)

2.4 Order of precedence. In the event of a conflict between the text of this document and the

references cited herein, the text of this document takes precedence. Nothing in this document,

however, supersedes applicable laws and regulations unless a specific exemption has been

obtained.

3. REQUIREMENTS

3.1 Description. The ILJS shall consist of four corner jack assemblies attachable to the top and

bottom of ISO corner fittings of 4.25 feet (ft) by 8 ft by 20 ft (1 295 mm by 2 438 mm by

6 096 mm), 8 ft by 8 ft by 20 ft (2 438 mm by 2 438 mm by 6 096 mm) and 8.5 ft by 8 ft by 20 ft

(2 591 mm by 2 438 mm by 6 096 mm) ISO containers. The ILJS shall provide level loading and

unloading of containers on C-130 and C-141 aircraft, 102-inch (2 591 mm) wide flatbed trailers,