MIL-C-53057(ME)
APPENDIX
TEST METHOD NO. 3
TRAVEL SPEED
1. TEST COURSE:
The test course shall be a dry, level surface of sufficient
length to attain maximum speed prior to entering measured
distance, plus measured distance, plus sufficient stopping
distance.
2. TEST APPARATUS:
a. Linear measurement equipment.
b. Stopwatch or electronic timer.
3. TEST PROCEDURE:
a. Drive the unloaded crane to attain maximum speed prior to
entering the measured test course. While accelerating,
perform gear or range changes under full throttle.
b. Drive through the measured distance at maximum speed,
recording the length of the distance and the time required to
traverse it. The measured distance shall be not less than 88
feet.
c. Turn the crane around and repeat the test approaching the
measured distance from the opposite end. Repeat for a total
of six runs, three in each direction through the measured
distance.
66
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business